ivirscar
Full Member
Lectric Enterprises
Posts: 237
|
Post by ivirscar on Sept 17, 2009 10:36:24 GMT -5
I am about to "re-tool" a bit for the next batch of speedo/fuel boards since it's only a few xtra bucks to do so... In the new job, the 4 digits that represented the "miles remaining" will now be a fully functional trip reset odometer. Some have asked many have wanted and one lonely vendor asked me why I didn't have it so... There it is! This odo will have the calibration mode as my "9 digit" unit and be resettable using a momentary button such as a pod button. Also, when miles are incremented on the display, they remain and are never lost until a reset or wraparound from 9999. Odometer data is saved in EEPROM memory and again, is never lost until a reset. Once calibrated, the calibrated ppm data is saved and never lost. I will have this job done within a month so if any of you guys are "due to ship" within this timeframe, let me know if you want to wait a bit more for this feature and I'll put you down... Marc is the next to receive... Brenon
|
|
|
Post by ws6air on Sept 17, 2009 11:31:37 GMT -5
|
|